Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2009 >> Malibu V6-3.6L >> Repair and Diagnosis >> Wiper and Washer Systems >> Washer Fluid Level Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Washer Fluid Level Switch: Service and Repair




Windshield Washer Solvent Level Indicator Replacement

Removal Procedure

1. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement (Service and Repair).




2. Disconnect the washer solvent container level sensor electrical connector.
3. Using a small flat-bladed tool, remove the washer solvent level indicator (4) from the washer solvent container (1).
4. Contain all lost windshield washer solvent into a suitable clean container.
5. Using a small flat-bladed tool, remove the level indicator seal (3) from the washer solvent container (1).

Installation Procedure




1. Position the level indicator seal (3) to the washer solvent container (1), pressing in until fully seated.
2. Using full strength windshield washer solvent on the seal, position the washer solvent level indicator (4) to the washer solvent container (1), pressing in until fully seated.
3. Connect the washer solvent level indicator electrical connector.
4. Install the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement (Service and Repair).
5. Fill the washer solvent container with windshield washer solvent.

pro multis · About Operation CHARM