Shock Absorber Replacement

Shock Absorber Replacement (1500)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Support the rear axle.




3. Remove the upper shock absorber nut and the bolt.
4. Remove the lower shock absorber nut and the bolt.
5. Remove the shock absorber.



Installation Procedure





1. Install the shock absorber.
2. Install the upper shock absorber nut and bolt.
Caution: Refer to Fastener Caution (Fastener Caution) .
3. Install the lower shock absorber nut and bolt.

* Tighten the upper shock absorber bolts to 115 Nm (85 lb ft).
* Tighten the lower shock absorber bolts to 115 Nm (85 lb ft).


4. Remove the support from the rear axle.
5. Remove the safety stands.
6. Lower the vehicle.