Coolant Temperature Sensor/Switch (For Computer): Service and Repair

Engine Coolant Temperature Sensor Replacement

Removal Procedure

Caution: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.






1. Drain the cooling system to a level below the engine coolant temperature (ECT) sensors. Refer to Cooling System Draining and Filling (Vac-N-Fill) (Service and Repair)Cooling System Draining and Filling (Static Fill) (Service and Repair) .
2. Disconnect the engine wiring harness electrical connector (1) from the appropriate ECT sensor.




3. Remove the appropriate ECT sensor (1).



Installation Procedure

Caution: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.






1. If installing the old sensor(s), coat the threads with sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent.
Caution: Refer to Fastener Caution (Fastener Caution) .
2. Install the appropriate ECT sensor (1).

Tighten the sensor to 20 Nm (15 lb ft).





3. Connect the engine wiring harness electrical connector (1) to the appropriate ECT sensor.
4. Fill the cooling system, as necessary. Refer to Cooling System Draining and Filling (Vac-N-Fill) (Service and Repair)Cooling System Draining and Filling (Static Fill) (Service and Repair) .