Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2009 >> Silverado 2500 2WD V8-6.6L DSL Turbo >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Testing and Inspection



Electronic Brake Control Module Programming and Setup

EBCM Replacement

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:


EBCM Reprogramming-Refer to Control Module References (Programming and Relearning) .


EBCM Reprogramming

If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS) (Programming and Relearning) .


Setup for Component Replacement

The brake fluid pressure sensor is not serviceable. After replacing a brake fluid presure sensor, it may be necessary to perform a brake pressure sensor calibration with the Tech 2 special function, if the DTC resets as a current code.

pro multis · About Operation CHARM