Input Carrier Bushing Replacement

Input Carrier Bushing Replacement


Tools Required
* J 43781 Input Carrier Bushing Remover/Installer
* J 8092 Universal Driver







Important: The preferred method for removing/installing the input carrier bushing is to useJ 43781 and a press. If a press is not available, useJ 43781 andJ 8092 universal driver.


1. Position the input carrier assembly (3) on the press with the external splines facing up.
2. If the bushing will be removed without a press, install the short end ofJ 43781 (2) ontoJ 8092 (1).
3. UsingJ 43781 , press or drive the bushing (4) out of the carrier.




4. If the bushing will be installed without a press, install the long end ofJ 43781 (2) ontoJ 8092 (1).
5. Install a new bushing (3) ontoJ 43781 (2).
6. UsingJ 43781 , press or drive the bushing into the carrier untilJ 43781 (2) seats.