Front Toe Adjustment

Front Toe Adjustment

1. Remove the power steering gear seal small clamps.
2. Verify that the steering wheel is centered and the wheels are in the straight ahead position.




3. Loosen the left and right tie rod jam nuts (2).

Note: Verify that the number of threads showing on both inner tie rod ends are approximately equal.

4. Rotate the inner tie rods in order to obtain the proper toe angle of 0 degrees.

Caution: Refer to Fastener Caution Fastener Caution.

5. Install the left and right tie rod jam nuts (2) and tighten to 68 Nm (50 lb ft).

Note: Verify that the power steering gear seal is not twisted.

6. Install the power steering gear seal small clamps.