Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2010 >> Cobalt L4-2.2L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Assembly: Service and Repair




Heater and Air Conditioning Control Replacement

Removal Procedure

1. Remove the instrument panel (I/P) center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Instrument Panel Center Trim Panel Replacement).




2. Remove the HVAC control module assembly screws.
3. Remove the HVAC control module assembly.

Note: The HVAC control connector-1 and the radio connector-2 can be interchanged. Mark or place tape on the connector to avoid accidental interchange.

4. Disconnect the HVAC control module assembly electrical connectors.

Installation Procedure




1. Connect the HVAC control module assembly electrical connectors.
2. Install the HVAC control module assembly.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the HVAC control module screws.

Tighten the screws to 2.2 Nm (19 lb in).

4. Install the I/P center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Instrument Panel Center Trim Panel Replacement).

pro multis · About Operation CHARM