Ignition Coil: Service and Repair

Ignition Coil Replacement

Removal Procedure




1. Ensure that the ignition key is in the OFF position.
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (Intake Manifold Cover Replacement).
3. Disconnect the ignition coil electrical connector(s) (1).




4. Remove the ignition coil bolt(s).
5. Remove the ignition coil(s).

Installation Procedure




1. Install the ignition coil(s).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the ignition coil bolt(s) and tighten to 10 Nm (89 lb in).




3. Connect the ignition coil electrical connector(s) (1).
4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (Intake Manifold Cover Replacement).