Operation CHARM: Car repair manuals for everyone.
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

67. Engine Flywheel Installation




Engine Flywheel Installation

Special Tools
* EN-38122-A - Crankshaft Balancer Holder
* EN-43653 - Flywheel Holding Tool
* EN-45059 - Angle Meter

For equivalent regional tools, refer to Special Tools (Special Tools).




1. Install the flywheel.
2. Install NEW bolts.

Caution: Refer to Fastener Caution (Fastener Caution).

Note: EN-43653 - flywheel holding tool may be used instead of EN-38122-A - holder in order to prevent crankshaft rotation.

3. Holding the crankshaft balancer with EN-38122-A - holder , tighten the bolts evenly. Tighten the bolts to 53 Nm (39 lb ft) , plus 25 degrees using the EN-45059 - meter