111. Intake Manifold Installation

Intake Manifold Installation





Caution: Refer to Fastener Caution (Fastener Caution).

Note: The intake manifold nuts must be tightened first.

1. Install the intake manifold studs (5) and tighten to 6 Nm (53 lb in).
2. Install the intake manifold gaskets (1).
3. Install the intake manifold (3).
4. Install the intake manifold nuts (4) and tighten to 10 Nm (89 lb in).
5. Install the intake manifold bolts (2) and tighten to 10 Nm (89 lb in).




6. Install the fuel return pipe bolt (1) to the top of the intake manifold and tighten to 10 Nm (89 lb in).