Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2010 >> HHR L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Accelerator Pedal >> Service and Repair >> Accelerator Pedal with Position Sensor Assembly Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal with Position Sensor Assembly Replacement




Accelerator Pedal with Position Sensor Assembly Replacement

Removal Procedure




1. Remove the knee bolster. Refer to Knee Bolster Replacement (Knee Bolster Replacement).
2. Remove the insulator panel. Instrument Panel Insulator Replacement (Instrument Panel Insulator Replacement).
3. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).




4. Remove the APP sensor nuts.
5. Remove the APP sensor.

Installation Procedure




1. Install the APP sensor.

Caution: Refer to Fastener Caution (Fastener Caution)

2. Install and tighten the APP sensor nuts to10 Nm(89 lb in).




3. Connect the APP sensor electrical connector (1).
4. Install the insulator panel. Instrument Panel Insulator Replacement (Instrument Panel Insulator Replacement).
5. Install the knee bolster. Refer to Knee Bolster Replacement (Knee Bolster Replacement).

pro multis · About Operation CHARM