Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2010 >> Malibu V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair >> Fuel Tank Pressure Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor Replacement




Fuel Tank Pressure Sensor Replacement

Removal Procedure




1. Remove the fuel tank. Refer to Fuel Tank Replacement (Removal and Replacement).
2. Disconnect the fuel tank fuel pump module wiring harness electrical connector (2) from the fuel tank pressure sensor.




3. Gently pull upward in order to remove the fuel tank pressure sensor from the fuel tank module.

Installation Procedure




1. Lightly lubricate the sensor seal with clean engine oil.
2. Press the sensor down fully into the fuel tank module.




3. Connect the fuel tank fuel pump module wiring harness electrical connector (1) to the fuel tank pressure sensor.
4. Install the fuel tank. Refer to Fuel Tank Replacement (Removal and Replacement).

pro multis · About Operation CHARM