109. Valve Rocker Arm Cover Installation - Lower Right Side

Valve Rocker Arm Cover Installation - Lower Right Side




1. Install NEW valve rocker arm cover grommets and use NEW valve rocker arm cover bolts if they are serviced with the grommet.

Note: The gasket may be reused if it is not torn, cracked, stretched, or swollen.

2. Install the lower valve rocker arm cover.





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the lower valve rocker arm cover bolts.

1. Tighten the lower valve rocker arm cover bolts in the proper sequence to 10 Nm (89 lb in).
2. Retighten the lower valve rocker arm cover bolts in the proper sequence to the same torque, 10 Nm (89 lb in).