49. Fiber 4-5-6 Clutch Plate Inspection

Fiber 4-5-6 Clutch Plate Inspection





Important:
* Measure as described below at a minimum of 3 locations.

* Replace any 4-5-6 clutch fiber plate that does not meet specifications.


1. Measure the thickness of each 4-5-6 clutch fiber plate (1) at dimension A.

The 4-5-6 clutch fiber plate minimum thickness is 2.375 mm (0.0935 in).

2. Measure the 4-5-6 clutch fiber plate oil groove depth of each plate at dimension B.

The 4-5-6 clutch fiber plate minimum groove depth is 0.200 mm (0.0079 in).