Air Flow Meter/Sensor: Service and Repair
Mass Airflow Sensor with Intake Air Temperature Sensor Replacement
Removal Procedure
1. Disconnect the engine wiring harness electrical connector (1) from the mass air flow (MAF)/intake air temperature (IAT) sensor.
2. Remove the MAF/IAT sensor TORX(R) screws.
3. Remove the MAF/IAT sensor.
Installation Procedure
1. Install the MAF/IAT sensor.
Caution: Refer to Fastener Caution (Fastener Caution).
2. Install the MAF/IAT sensor TORX(R) screws.
Tighten the screws to 8 Nm (70 lb in).
3. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.