Horn: Service and Repair

Horn Replacement

Removal Procedure




1. Remove the grille. Refer to Grille Replacement (Service and Repair).
2. Disconnect the horn assembly electrical connector.
3. Remove the bolt that retains the horn assembly to the radiator support.
4. Remove the horn assembly from the body.

Installation Procedure




1. Install the horn assembly to the radiator support.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the bolt that retains the horn assembly to the radiator support.

Tighten the bolt to 10 Nm (88 lb in).

3. Connect the horn assembly electrical connector.
4. Install the grille. Refer to Grille Replacement (Service and Repair).