Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2011 >> Colorado 2WD L5-3.7L >> Repair and Diagnosis >> Lighting and Horns >> License Plate Lamp >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

License Plate Lamp: Service and Repair




Rear License Plate Lamp Bulb Replacement

Removal Procedure




1. Ensure the headlamp switch is in the OFF position.
2. Disconnect the electrical connector (2) from the license lamp assembly (1).
3. Remove the nut (3) retaining the license lamp to the bumper.
4. Remove the license lamp assembly from the bumper.
5. Twist the lamp socket counterclockwise to remove.
6. Remove the bulb.

Installation Procedure




1. Install the bulb to the lamp socket.
2. Twist the lamp socket clockwise to install.
3. Install the lamp assembly (1) into the bumper.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the license lamp nut (3).

Tighten the nut to 2.5 Nm (22 lb in).

5. Install the electrical connector (2).
6. Inspect the lamp operation.

pro multis · About Operation CHARM