Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

100. Automatic Transmission Flex Plate Installation

Automatic Transmission Flex Plate Installation

Special Tools

EN-652 - Flywheel Holder

For equivalent regional tools, refer to Special Tools (Tools and Equipment).

1. Clean the 6 screw bores. Rework if necessary.

2. Install the automatic transmission flex plate (1).
3. Install the 6 automatic transmission flex plate bolts (2).

4. Install EN-652 - flywheel holder (1) in order to fix the automatic transmission flex plate (2).

Caution: Refer to Fastener Caution (Fastener Caution).

5. Tighten the 6 automatic transmission flex plate bolts in a cross sequence to 35 Nm(26 lb ft).
6. Tighten the 6 automatic transmission flex plate bolts in a cross sequence to an additional 30°.
7. Tighten the 6 automatic transmission flex plate bolts in a cross sequence to an additional 15°.