Instrument Panel Tie Bar Replacement (Left Hand Drive)

Instrument Panel Tie Bar Replacement (Left Hand Drive)

Removal Procedure

1. Remove instrument panel assembly. Refer to Instrument Panel Assembly Replacement (Instrument Panel Assembly Replacement).




2. Remove instrument panel wiring harness (2) from instrument panel tie bar (1).
Disconnect electrical connectors.




3. Remove instrument panel tie bar (2).

1. Remove 4 instrument panel tie bar bolts (3, 4).
2. Remove 2 instrument panel tie bar nuts (1).

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install instrument panel tie bar (2).

1. Install 4 instrument panel tie bar bolts (3, 4) and tighten to 22 Nm (16 lb ft).
2. Install 2 instrument panel tie bar nuts (1) and tighten to 9 Nm (80 lb in).




2. Install instrument panel wiring harness (2) to instrument panel tie bar (1).
Connect electrical connectors.
3. Install instrument panel assembly. Refer to Instrument Panel Assembly Replacement (Instrument Panel Assembly Replacement).