Grille: Service and Repair

Grille Replacement

Removal Procedure

1. Remove the park/turn signal lamp. Refer to Parking and Turn Signal Lamp Replacement (Service and Repair).




2. Remove the bolts (2) that retain the radiator grille (1) to the radiator support.
3. Remove the retainers at the top of the radiator grille (1) from the radiator support.
4. Remove the radiator grille (1) from the vehicle.

Installation Procedure




1. Install the radiator grille (1) to the vehicle.
2. Align the locating pin and the retainers at the top of the radiator grille (1) with the slots in the radiator support.
Press the retainers into place.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the bolts (2) that retain the radiator grille (1) to the radiator support and tighten to 1 Nm (9 lb in).
4. Install the park/turn signal lamp. Refer to Parking and Turn Signal Lamp Replacement (Service and Repair).