Oil Filter: Service and Repair

Engine Oil and Oil Filter Replacement

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the drain plug and drain the engine oil in a suitable container.




3. Remove the oil filter.
4. Inspect to ensure the engine oil filter gasket is removed.

Installation Procedure




1. Lubricate the oil filter gasket with clean engine oil.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the oil filter and tighten to 30 Nm (22 lb ft).




3. Install the drain plug and tighten to 25 Nm (18 lb ft).
4. Lower the vehicle.
5. Fill the engine with the proper capacity and quality of engine oil. Refer to Approximate Fluid Capacities ([1][2]Maintenance).
6. Operate the engine, check for leaks, and oil pressure.