Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
60. Low and Reverse Clutch Backing Plate Inspection
Low and Reverse Clutch Backing Plate Inspection
Important: Perform the following measurements at 3 or more locations.
1. Measure the thickness of each low and reverse clutch backing plate (1) at dimension A.
The low and reverse clutch backing plate minimum thickness is 17.900 mm (0.7047 in).
2. Measure the cone of the low and reverse clutch backing plate (1).
3. Replace the low and reverse clutch backing plate (1) if any cone is present.