Parking Brake Indicator Switch Replacement (9C1)

Parking Brake Indicator Switch Replacement (9C1)

Removal Procedure

1. Remove the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side Instrument Panel Insulator Panel Replacement - Left Side.

2. Disconnect the parking brake indicator switch electrical connector.





3. Remove the parking brake indicator switch bolt (1).





Note:
The fork in the parking brake indicator switch contact fits over the parking brake lever cable actuator.

4. Remove the parking brake indicator switch (1).

Installation Procedure





Note:
The fork in the parking brake indicator switch contact fits over the parking brake lever cable actuator.

1. Align the pin in the parking brake indicator switch with the hole in the parking brake lever pedal bracket and install the parking brake indicator switch (1).





Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the parking brake indicator switch bolt (1) and tighten to 2 Nm (18 lb in).

3. Connect the parking brake indicator switch electrical connector.

4. Install the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side Instrument Panel Insulator Panel Replacement - Left Side.