Adding Keys

Adding Keys

North America

Note:

* To initiate, this procedures requires that a learned master key be available.

* A total of 10 keys may be programmed to a single vehicle.

* This procedure adds keys only. The procedure does not erase previously learned keys.

* The keys to be learned must duplicate the mechanical cut of the current key.

1. With a learned master key, turn ON the ignition, with the engine OFF.

2. Turn OFF the ignition and remove the key.

3. Within 10 seconds of turning OFF the ignition, insert the key to be learned and turn ON the ignition. The vehicle has now learned the new key.

Except North America

Note:

* To initiate, this procedures requires that two learned master keys be available.

* A total of 10 keys may be programmed to a single vehicle.

* This procedure adds keys only. The procedure does not erase previously learned keys.

* The keys to be learned must duplicate the mechanical cut of the current key.

1. With a learned master key, turn ON the ignition, with the engine OFF.

2. Turn OFF the ignition and remove the key.

3. With a second learned master key, turn ON the ignition, with the engine OFF.

4. Within 10 seconds of turning OFF the ignition, insert the key to be learned and turn ON the ignition. The vehicle has now learned the new key.