Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Corvette V8-6.2L >> Repair and Diagnosis >> Brakes and Traction Control >> Brake Pedal Assy >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Pedal Assy: Service and Repair




Brake Pedal Assembly Replacement

Removal Procedure

1. Remove the instrument panel knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement Service and Repair.





2. Disconnect the accelerator pedal position sensor (1) and brake apply sensor (2).





3. Remove the retainer, washer, brake booster pushrod, and brake pedal pin from the brake pedal.

4. Reposition the isolation mat by cutting a small slit in the mat.





5. Remove the brake pedal pivot bolt and nut.

6. Remove the brake pedal from the mounting bracket.

Installation Procedure





1. Lubricate the bushings, pivot bolt, and all friction parts with high temperature silicone brake lubricant.

2. Install the brake pedal to the mounting bracket.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the pivot bolt and nut.

Tighten the brake pedal pivot nut to 29 Nm (21 lb ft).

4. Reposition the dash isolation mat.





5. Install the retainer, washer, brake booster pushrod, and brake pedal pin to the brake pedal. Verify proper engagement of the retainer to the brake pedal pin by rotating the retainer.





6. Connect the accelerator pedal position sensor (1) and brake apply sensor (2).

7. Install the instrument panel knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement Service and Repair.

pro multis · About Operation CHARM