Manifold Pressure/Vacuum Sensor: Service and Repair

Manifold Absolute Pressure Sensor Replacement (Without LS9)

Removal Procedure





1. Remove the oil filler cap (1).

2. Remove the right engine sight shield (2).

3. Remove the manifold absolute pressure (MAP) sensor (4).

4. Disconnect the electrical connector (3) for the MAP sensor.

Installation Procedure





1. Reconnect the MAP sensor electrical connector (3) to the engine wiring harness.

2. Install the MAP sensor (4).

3. Install engine sight shield (2).

4. Install the oil filler cap (1).