Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2012 >> Traverse FWD V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> 60. Valve Spring Inspection and Measurement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

60. Valve Spring Inspection and Measurement




Valve Spring Inspection and Measurement

Special Tools

EN 22738-B - Valve Spring Tester

For equivalent regional tools, refer to Special Tools Special Tools.

Inspection Procedure

1. Clean the valve springs in solvent.

Warning:
Refer to Safety Glasses Warning Safety Glasses Warning.


2. Dry the valve springs with compressed air.

3. Inspect the valve springs for broken coils or coil ends.

Measurement Procedure





1. Measure the valve spring tension using the EN 22738-B - tester. Refer to Engine Mechanical Specifications (LLT) Service Limits & General Specifications.

2. If low valve spring load is found, replace the valve springs. DO NOT use shims to increase spring load. The use of shims can cause the valve spring to bottom out before the camshaft lobe is at peak lift.

pro multis · About Operation CHARM