Crankshaft Main Bearing

MAIN BEARING CAP





Caution:
This component is equipped with torque-to-yield fasteners. Install a NEW torque-to-yield fastener when installing this component. Failure to replace the torque-to-yield fastener could cause damage to the vehicle or component.





Inboard Bolts (1-8)

First Pass 20 Nm (15 lb ft)
2nd Pass an additional 80 degrees





Outboard Bolts (9-16)
First Pass 15 Nm (11 lb ft)
2nd Pass an additional 110 degrees





Short/inner Bolts (17-20)
First Pass 30 Nm (22 lb ft)
2nd Pass an additional 60 degrees

Long/outer Bolts (21-24)

First Pass 30 Nm (22 lb ft)
2nd Pass an additional 60 degrees

�Crankshaft Main Bearing Clearance 0.031-0.069mm 0.0012-0.0027in