Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2013 >> Corvette V8-6.2L SC >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Cooling System >> Radiator Cooling Fan >> Radiator Cooling Fan Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radiator Cooling Fan Control Module: Service and Repair




Fan Control Module Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.





2. Disconnect the cooling fan control module electrical connector.





3. Remove the cooling fan control module retaining bolt.

4. Remove the cooling fan control module from the vehicle.

Installation Procedure





1. Install the cooling fan control module to the vehicle.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the cooling fan control module retaining bolt and tighten to 6 Nm (53 lb in).





3. Connect the cooling fan control module electrical connector.

4. Lower the vehicle.

5. Refer to Control Module References Control Module References for programming and setup information.

pro multis · About Operation CHARM