Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Oil Pump Installation
Oil Pump Installation
1. Inspect for properly installed oil pump locator pins.
Note:
Do not reuse the oil pump driveshaft retainer.
During assembly, install a NEW oil pump driveshaft retainer.
2. Install the oil pump.
3. Position the oil pump onto the pins.
Caution:
Refer to Fastener Caution Fastener Caution.
4. Install the oil pump bolt attaching the oil pump to the rear crankshaft bearing cap. Tighten the oil pump bolt to 90 Nm (66 lb ft).