Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Backup Lamp: Service and Repair

Backup Lamp Replacement

Removal Procedure

1. Disconnect the electrical connector from the lamp assembly.

2. Remove the nut retaining the lamp assembly to the bracket.

3. Remove the lamp assembly from the bumper.

Installation Procedure

1. Install the lamp assembly to the bumper.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the nut to the lamp and tighten to 2 Nm (18 in lb).

3. Connect the electrical connector to the lamp assembly.