Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Reverse Input Clutch Housing Front and Rear Bushing Replacement
Reverse Input Clutch Housing Front and Rear Bushing Replacement
Removal Procedure
Special Tools
* J 7004-A - Universal Remover
* J 8092 - Driver Handle
* J 25019 - Bushing Service Set
* J 34196-B - Transmission Bushing Service Set
1. Inspect the reverse input clutch housing and drum assembly for the following conditions:
* Damaged or worn bushings
* Surface finish on the hub and outer housing - check band surface for flatness
* Leak at the weld
* Heat distortion
* Rolled or distorted retaining ring groove
2. Using the J 25019-16 which is part of J 25019 - bushing service set with the J 7004-A - remover, remove the reverse input clutch front bushing (603).
3. Using the J 25019-4 which is part of J 25019 - bushing service set with the J 8092 - driver handle, remove the reverse input clutch rear bushing (606).
Installation Procedure
1. Using the J 25019-9 which is part of J 25019 - bushing service set with the J 8092 - driver handle, install a reverse input clutch front bushing (603).
2. Using the J 34196-3 which is part of kit J 34196-B - bushing service set with the J 8092 - driver handle, install a reverse input clutch rear bushing (606).