Fog/Driving Lamp Switch: Service and Repair

Rear Fog Lamp Switch Replacement

Removal Procedure





Important:
Avoid excessive force when prying the bezel from the instrument panel extension.


1. Pry the bezel from the instrument panel extension using a flat-bladed tool.

2. Remove the electrical connector from the rear fog lamp switch.





3. Press the tabs on the rear fog lamp switch in order to disengage the tabs from the bezel.

4. Remove the rear fog lamp switch from the vehicle.

Installation Procedure





1. Install the following components to the instrument panel extension:

* The rear fog lamp switch

* The bezel

2. Apply pressure to the rear fog lamp switch in order to engage the tabs on the switch to the bezel.

3. Install the rear fog lamp switch.





4. Install the electrical connector to the rear fog lamp switch.

5. Install the bezel to the lower panel extension.