Differential Oil Replacement (10.5 Inch Axle)

Differential Oil Replacement (10.5 Inch Axle)

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.




2. Remove the fill plug (1).




3. Remove the rear axle drain plug (1).

4. Drain the lubricant into a suitable container.

Installation Procedure





Caution: Refer to Fastener Caution Fastener Caution.

1. Install the rear axle drain plug (1) and tighten to 33 Nm (24 lb ft).

2. Fill the rear axle with the proper fluid. Refer to Approximate Fluid Capacities [1][2]Maintenance and Fluid and Lubricant Recommendations Fluids.




3. Install the fill plug (1) and tighten to 60 Nm (44 lb ft).

4. Remove the support and lower the vehicle.