Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Wiper Motor Cover Replacement




Windshield Wiper Motor Cover Replacement

Removal Procedure





1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement Service and Repair.

2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement Service and Repair.

3. Disconnect the electrical connector from the wiper motor.





4. Remove the 3 screws (2) and the wiper motor cover (3) from the wiper motor (1).

5. Remove the wiper motor cover (3).

Installation Procedure





Caution:
Refer to Fastener Caution Fastener Caution.

1. Install the wiper motor cover onto the wiper motor with the 3 screws and tighten to 3 Nm (26 lb in).





2. Connect the electrical connector to the wiper motor.

3. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement Service and Repair.

4. Install the wiper arms. Refer to Windshield Wiper Arm Replacement Service and Repair.

5. Operate the wipers and inspect for proper operation.