Cylinder Head Assembly: Specifications

Cylinder Head Bolt*





First Pass 30 Nm (22 lb ft)
Final Pass 190 Degrees

*Use NEW fastener






Front Camshaft Cap Bolts (in sequence) 10 Nm (89 lb in) twice.

Surface Flatness - Block Deck - in 25 mm 0.025 mm (0.0001 in)
Surface Flatness - Block Deck - in 150 mm 0.050 mm (0.0019 in)
Surface Flatness - Block Deck - between bolts 0.030 mm (0.0012 in)
Surface Flatness - Block Deck - Overall 0.100 mm (0.0039 in)


Intake Manifold Specifications

Exhaust Manifold Specifications

Camshaft Gear/Sprocket Specifications