Exhaust Manifold Installation

Exhaust Manifold Installation (LTG)




1. Install a NEW exhaust manifold gasket (2).

2. Install the exhaust manifold (1) to the cylinder head.

3. Hand start NEW exhaust manifold to cylinder head retaining bolts (3).





Caution: Refer to Fastener Caution Fastener Caution.

Note: Fasteners have adhesive patch and must be tightened to final torque within 5 minutes.

4. Tighten the NEW exhaust manifold to cylinder head bolts three passes in sequence to 20 Nm (15 lb ft).




5. Install the exhaust manifold brace (2).

6. Install the exhaust manifold brace bolts (3) and tighten to 25 Nm (18 lb ft)

7. Install NEW exhaust manifold brace nuts (1) and tighten to 25 Nm (18 lb ft)




8. Install the exhaust manifold heat shield (1).

9. Install the exhaust manifold heat shield bolts (2) and tighten to 14 Nm (124 lb in).