Water Pump Removal

Water Pump Removal (LTG)




1. Disconnect the thermal bypass hose at the engine oil cooler.

2. Remove the thermal bypass pipe bolts (1) at the water pump assembly.

3. Disconnect the pipe from the water outlet assembly.

4. Remove the thermal bypass pipe (2) and gasket (3) from the water pump assembly. Discard the gasket.




5. Remove the retaining clip (5) and engine coolant temperature sensor (2).

6. Remove the water outlet assembly (1), bolts (4), and gasket seal (3). Discard the gasket.




7. Remove the thermostat assembly (2), bolts (3), and gasket seal (4). Discard the gasket.

8. Remove the water pump assembly (5), bolts (1), and seal (6). Discard the seal.