Overhaul Procedure Steps

NOTE: This article lists the sequential steps necessary to overhaul the transmission.
^ For the specific step listed below, refer to that step under "Repair Instructions". Repair Instructions

1. Transmission Disassemble
2. Main Shaft Disassemble
3. Shift Shaft and Fork Assemblies Disassemble
4. Transmission Front Case Disassemble
5. Transmission Rear Case Disassemble
6. Gears and Shafts Cleaning and Inspection
7. Bearings and Spacers Cleaning and Inspection
8. Transmission Rear Case Assemble
9. Transmission Front Case Assemble
10. Main Shaft Assemble
11. Shift Shaft and Fork Assemblies Assemble
12. Main Shaft and Counter Gear Shaft Axial Play Measurement
13. Transmission Assemble