Control Solenoid Valve and Transmission Control Module Assembly Inspection

Control Solenoid Valve and Transmission Control Module Assembly Inspection





1. Inspect the control solenoid (w/body and TCM) valve assembly connectors and pins (2, 3, 4) for the following conditions:

* Damage

* Bent pins

* Debris

* Broken retaining tab

* Contamination

2. Ensure no metallic debris is inside the connectors near the terminal pins.

3. Inspect the control solenoid (w/body and TCM) valve assembly solenoid leads (1) for contamination or metallic debris.

4. Inspect the 4 control solenoid (w/body and TCM) valve assembly filter plate retaining tabs (5) for cracks and ensure proper tension when filter plate is attached.