Transmission Disassemble

Transmission Disassemble

Special Tools

* 3-9506289 - Universal Adapter

* R-0007758 - Holding Fixture

* S-9407198 - Differential Bearing Race Wrench

For equivalent regional tools, refer to Special Tools F13-5/F15-5/F17-5 (M26) - Manual Transmission.





1. Attach R-0007758 - holding fixture (2) to the transmission.

2. Attach R-0007758 - holding fixture (2) with transmission to the 3-9506289 - Universal Adapter (1).





3. Remove the clutch release bearing (1).





4. Remove the clutch fork shaft retaining bolt (2).

5. Remove the clutch fork shaft (1).





6. Remove the transmission control lever housing bolts (1).

7. Remove the control lever housing (2) and gasket (3).





8. Remove the transmission cover bolts (3).

9. Remove the transmission cover (2) and gasket (1).





10. Remove the back up lamp switch (1).





11. Remove the transmission case bolts (3).

12. Remove the transmission case (2) and gasket (1).

13. Remove the case magnet (4), may stay with case.

14. Remove the reverse idler gear washer (5), may stay on the reverse idler gear shaft.





15. Remove the vehicle speed sensor bolt (1).

16. Remove the vehicle speed sensor (2).





17. Mark the differential bearing adjuster and case (1) before removal.





18. Remove the differential bearing adjuster lock bolt (1).

19. Remove the differential bearing adjuster lock (2).





20. Using S-9407198 - differential bearing race wrench remove the front differential bearing adjuster (1).

21. Remove the front differential bearing retainer O-ring seal (2).





22. Remove the front differential carrier cover bolts (1).

23. Remove the differential carrier cover (2) and gasket (3).





24. Remove the front differential carrier (1).