Electric Door Lock Switch - Separated While Installed

86chevy07

Number: 86-182

Section: 9

Date: OCT., 1986
Subject: ELECTRIC DOOR LOCK SWITCH SEPARATION


Model and Year: 1985-86 CAPRICE AND MONTE CARLO WITH ELECTRIC DOOR LOCKS 1985-86 EL CAMINO AND C/K/G 10, 20, 30 TRUCKS WITH ELECTRIC DOOR LOCKS


TO: ALL CHEVROLET DEALERS


Some electric door lock switches may become separated while installed in the vehicle. This condition may be reported on either the right, left, or both front doors. Two different type clips have been released to correct this condition.mClips should be added to both door lock switches even if only one is reported as separated.


For Switch, P/N 20209091 Use Clip, P/N 16602550
For Switch, P/N 20043224

For Switch, P/N 3078509 Use Clip, P/N 16602549









To install clips:

1. Remove switch assembly as described in the body Service Manual.

2. If switch has become separated, inspect for damage, if no damage is found reassemble switch and add two clips as indicated on illustration.

3. If switch is separated and damaged, replace complete switch assembly and add clips as indicated on illustration.

Use applicable Labor Operation Number and Time.
NOTE:

Adequate quantities of both clips should be maintained to allow for prompt repair