4-Speed Transmission

FASTENER TORQUE SPECIFICATIONS
Plug, drain and Fill 23 Nm (17 lb ft)
U-Joint Flange Nut 135 Nm (100 lb ft)
Rear Retainer Screw (Top) 27 Nm (20 lb ft)
Rear Retainer (Bottom) 40 Nm (30 lb ft)
Vehicle Speed Sensor 43 Nm (32 lb ft)
Transmission to Clutch Housing Screw 100 Nm (74 lb ft)
Transmission to Mount Screw 47 Nm (35 lb ft)
Crossmember to Mount Screw 54 Nm (40 lb ft)
Crossmember to Frame Screw 75 Nm (55 lb ft)
Flywheel to Crankshaft Bolts 90 Nm (65 lb ft)
Clutch Cover to Flywheel......Tighten each screw one turn at a time to avoid warping the clutch cover.

NOTE: The OE service manual does not provide a tightening specification for the clutch cover to flywheel screws.