High-Side High-Pressure & High-Side Low-Pressure Cutoff Switch
V5 COMPRESSORRear Head Details - V5 Compressor:
Compressor Components:
Remove or Disconnect
Tool Required:
J 5403 Internal Snap Ring Pliers
1. Retainers (45) from switches (3) and (4).
2. Switches (3) and (4).
3. O-ring seals (44) from the switch cavities.
Clean
- Switch cavity and O-ring seal groove.
Install or Connect
Tools Required:
J 5403 Internal Snap Ring Pliers
1. O-ring seals (44) to the switch cavity.
- Dip the O-ring seals into clean 525 refrigerant oil.
2. Switches (3) and (4).
3. Retainers (45).