Cam Unit Disassembly 9-1/2 Inch

- Tools Required:
- J 22912-01 Bearing Remover

REMOVE OR DISCONNECT
- Measure and record the overall length of the gear assembly from the front of the gear to the back of the side thrust sleeve including the side gear thrust washer.

1. Guide clips (20).
2. Side thrust sleeve (14) using J 22912-01.





- Press the sleeve from the side gear.
3. Clutch plates (12).
4. Wave washer (15).
5. Cam plate (16).
6. Cam side gear (21).