Disassembly of the Differential

- Tools Required:
- J 26252 Governor Remover

REMOVE OR DISCONNECT





1. Governor bushing using J 26252.
2. The E-clips that hold the latching bracket in place on the bracket shaft.
- Move the bracket down the shaft.
3. Latching bracket bushing using J 26252.
4. Latching bracket, shaft; and spring from the case.
5. Governor assembly from the case.
6. Stop pin (9 1/2 inch only).
7. Lock screw.
8. Pinion shaft.
9. Differential pinion gears and pinion thrust washers.
- Roll the gears out of the case by rotating one of the side gears.
10. Thrust block.
11. Right side gear.
12. Right clutch plates and side thrust washer.
13. Left side gear, cam plate, and clutch plates as an assembly (cam unit).
14. Side gear thrust washer.