Weather Pack Connectors

Fig. 21 Typical Weather Pack Connector and Terminal:

PROCEDURE
1 Separate the connector halves.
2. Open secondary lock. A secondary lock aids in terminal retention and is usually molded to the connector.
3. Grasp the lead and push the terminal to the forward most position. Hold the lead at this position.
4. Insert the Weather Pack terminal removal tool into the front (mating end) of the connector cavity until it rests on the cavity shoulder.
5. Gently pull on the lead to remove the terminal through the back of the connector.

NOTE: Never use force to remove a terminal from a connector.

6. Inspect the terminal and connector for damage. Repair as necessary.
7. Reform the lock tang and reseat terminal in connector body.
8. Close secondary locks and join connector halves.