Side Gear (RH) Clutch Service

1. Remove disc pack and shim from side gear, keeping components in order.
2. Clean and inspect components, and replace any that are damaged, deformed or excessively worn. If side gear must be replaced. refer to Shim Selection for shim selection prior to case assembly.
If side gear hub is scored or worn, inspect bore in case and replace assembly if bore is damaged or worn.

Fig. 8 Exploded View Of Eaton Locking Differential.:

3. Alternately assemble eared discs and splined discs on side gear hub, starting with eared disc as shown in Fig. 8.
4. Install original shim or replacement shim of same thickness if original side gear is being used.