Operation CHARM: Car repair manuals for everyone.
Home >> Chevy Truck >> 1994 >> K 1500 Suburban 4WD V8-350 5.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive Axles, Bearings and Joints >> Axle Shaft Assembly >> Service and Repair >> Rear Drive Axle >> Rockwell Full Floating Axle >> Wheel Bearings >> Bearing & Cup

Bearing & Cup

REAR WHEEL BEARINGS

Fig. 7 Removing Outer Bearing & Cup:






1. Using a hammer and suitable drift, drive inner bearing, cup and seal from hub assembly.
2. Remove outer bearing snap ring using suitable pliers.
3. Using tools J-24426 and J-8092, Fig. 7, drive outer bearing and cup from hub assembly.
4. Install new outer bearing into hub assembly.
5. Install outer bearing cup using tools mentioned in Step 3. Drive cup beyond snap ring groove. Install outer bearing cup with tool J-8092 positioned upside down to prevent chamfer on tool from damaging cup.
6. Install snap ring into groove using suitable pliers.
7. Using tool J-24426, drive cup against snap ring.
8. Install inner bearing cup using tools J-24427 and J-8092. Drive cup into position until it seats against shoulder of hub bore.
9. Install new oil seal.
pro multis · About Operation CHARM