A/T - Transmission Fluid Leak From Pump Body
File In Section: 7 - TransmissionBulletin No.: 57-71-26B
Date: April, 1997
Subject:
Transmission Fluid Leak from Pump Body (Replace Bushing)
Models:
1995-96 Buick Road master
1995-96 Cadillac Fleetwood
1995-96 Chevrolet Caprice, Camaro, Corvette
1995-96 Pontiac Firebird
1995-96 Chevrolet and GMC Truck C/K, M/L, S/T, G Models
1996 Oldsmobile Bravada
with HYDRA-MATIC 4L60-E Transmission (RPO M30)
This bulletin is being revised to remove the Warrant Statement under correction to GMC dealers. Please discard Corporate Bulletin number 57-71-26A (Section 7 - Transmission).
Condition
(Figure 1) Some owners may experience a pump fluid leak. Starting September 11, 1995 (Julian Date 254) all units are built using a revised design body bushing.
Cause
The pump bushing is spinning or walking out of the body.
Correction
Replace the pump body bushing using Kent-Moore tool J 41778.
Removal and Replacement Procedure (Figures 2-5)
1. Remove the front helix retainer (244).
2. Remove the oil seal assembly (243).
3. Remove the pump body bushing (242) using tool J 41778-1.
4. Install new bushing using J 41778-2 as a positive stop and an Arbor Press with J 41778-1.
Refer to your service manual for proper pump assembly removal and replacement procedures.
Parts Information
Part # Description
* 24206030 Bushing-Pump Body
* This part will service all 4L60 and 4L60-E applications from 1982-1996.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation Labor Time
Use published labor
K7121 operation time.